1963-79 Adjustable Camber Rods

• 2024 CF Solid Aluminum Hex Tubing
• Black Finish
• Machined Ring Indicates LH Thread
• Hardware Provided

Van Steel's Camber Rods/Strut Rods are designed to maintain vertical alignment and to decrease negative camber. The custom made rods are stronger and lighter than stock and improve tire wear and handling. The 2024 CF aluminum hex tubing allows for quicker adjustments when aligning the car. Forged ends with Energy Suspension bushings are used in the rod ends and will not crumble like injected molded bushings found in a majority of other camber rods. We offer FK Bearing rod ends as well as an upgrade.

If you don't buy the smart strut kit, square lock out plates are provided with the kit to eliminate factory eccentric cams that can cause the rear alignment to move. 

Smart Strut Brackets lower the inboard pivot mount. By lowering the inboard pivot mount, it puts less stress on the wheel bearings, reduce uneven tire wear and helps with forward bite. With a vertical slot for the inboard through bolt, this bracket is a All-in-One bracket for all types of racers and advanced street drivers.

FK Bearing Rod Ends eliminate any bushing deflection under hard cornering and acceleration that you would typically see with rubber or poly bushings. They also maintain a consistent alignment and to decrease negative camber settings. Strut Rods are stronger than stock. Recommended for autocross and track setups or advanced street drivers. We designed our inserts that the go into the the rod ends making it easier to install and we use Seals-it Seal to protect the rod end and extend it's life.

We recommend LH Threads to the outboard (wheel) side.