1969-82 1" Drop Spindles

• 1" Drop Spindle x2
• LH & RH Steering Arms
• Machined out of 6061-T6
• Clear Anodized Coating
• Raised Roll Center
• Retains Factory D8 Calipers, Rotors & Hubs
• Preserves and can Improve Ride Quality 
• Improves Handling
• Retains Suspension Travel
• Reduced Weight

Our billet aluminum drop spindles preserve ride quality b/c spring rate is not changed and shock absorbers retain shock travel (for non lowered cars). For lowered cars with reduced shock travel, drop spindles will help improve ride because it will give back 1" of shock travel that was lost making the shock less likely to bottom out. These will pair great with BB coil springs in SB cars for a total of 1.75-2" drop or coilovers

Drop spindles will also improve handing because of a lower center of gravity. 

The spindles and steering arms reduce unsprung weight netting a 9 lbs. weight loss, 4.5 lbs. per side. Unsprung weight improves traction and stability by allowing the wheels to follow the contours of the road more closely, increasing tire contact and improving grip. With less mass moving up and down the wheels can change direction faster thus, making the car more responsive.

Finally, our drop spindles are taller than OE. By raising roll center it decreases body roll and increases stability. Does NOT change track width. 

These fit 1969-82 with no other parts mods needed. Swap your parts over and hit the road. 1963-68 will need late big bearing hubs and modification to 1 caliper mounting bracket hole.

Add coilovers or lowering springs for even more of a drop.