1963-82 Front Hubs

• American Made
• 4140 Annealed
• New Timken Bearings and Races
• New SKF Seal
• Spindle Nut, Washer, Cotter Pin & Grease Cap
• New OEM Studs
• Clear Corrosive Resistant Coating 
• FB-15CE for 63-68
• FB-15C for 69-82 - No castle nut or washer included due to backorder

Van Steel's new front hubs come as a complete package with Timken bearings and SKF seals. Each hub is inspected after the races are installed for proper run out spec. We check EVERY hub for runout before it leaves and it must be under .003" run out or less. Coating thickness can vary .001-.002" which is why we shoot for .003" as our max. This ensures no pad knock and a better braking system. New factory size wheel studs are installed. Also included is a new castle nut, cotter pin, washer and grease cap. Hubs are made out of 4140 Annealed and are stronger than factory cast hubs.

Choose CE for 63-68 Corvettes, or C for 69-82 models. 

NOTE: Since we are assembling the hubs with races already seated and lug studs installed, you may see rings around the surface area of the studs. This is because the studs may not be straight when they are initially pressed in. We test fit a rotor on each hub as well to ensure fitment for the end user. If the stud isn't straight we will use a thick flat washer and draw it straight with a nut instead of hammering on them and potentially damaging the matting surface to the rotor.