1985-96 Front SKF Hub Conversion Adapters
Couldn't load pickup availability
Got questions?
Feel free to get in touch
- Use C5/6/7 Hub Bearings on a C4
- Adapters Machined out of 7075-T6
- American Made
- Hardware for Hub and Knuckle Included
New for 2025 is the ability to have these brackets so racers can adapt to a modern, tune-able ABS system from Delta ABS when using C7 Hubs. The ABS adapter can be purchased separately
The advantages of a SKF X-Tracker hub bearing over all others:
With the SKF hub you gain increased stiffness for better brake performance under high loads. Under race competitive use, you may go an entire season without replacement. This unit is designed to provide a high stiffness during cornering, reducing piston knock-back and the need to trail brake. It's also designed for durability and to maintain preload at a sustained loading of 1.2g. All this adds to faster lap times and better driver feedback.
The X-tracker, has a double row angular contact ball bearing arrangement. The outboard row has a larger diameter and contains more balls than the inboard row. Its asymmetric design increases load carrying capacity and operational life and raises camber stiffness above that of symmetrical hub units.