Borgeson Conversion Kit for Factory Power Steering

• New Gen 2 Box
• Quick Ratio 14:1
• Hoses
• Drag Link Adapter
• Steering Rag Joint

The kit includes power steering conversion box, power steering hoses, drag link adapter and steering rag joint. All major components needed for complete power steering conversion are included in this kit.

Borgeson 2nd generation power steering upgrade kit for 63-66 Corvettes with factory power steering. This kit includes quick ratio conversion box, hoses, rag joint connector and drag link adapter. The factory column will need to be trimmed for installation or a new replacement internal column shaft is available separately. Lose the leaky control valve and feel the road with a new integral power steering conversion from Borgeson. All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year warranty.

• Early Cars (1963-66) use a 3/4" - 36 Spline x 18mm Double D
• Late Cars (1967-82) use a 1" - 48 Spline x 18mm Double D

• Input Shaft: 11/16"-36 Spline
• Pitman Shaft: 1-1/8" GM with 32 Splines and 4 Master Splines
• Pressure Port: M16 X 1.5 Flare (Closest to Engine)
• Return Port: M16 X 1.5 Flare (Closest to Steering Column)
• Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
• Flow Rate: 2.0-2.5 GPM Flow Rate Recommended